ENHWI-2AN3 | Wireless N300 Router/ Repeater / Access Point 3-in-1, 2dBi Antenna

Product Images: Click to view larger

• Velocidad de Transferencia de hasta 300 Mbps
• Extensión de la Cobertura Inalámbrica Existente en el Modo de Repetidor
• Seguridad Inalámbrica Avanzada y Cortafuegos
• Creación de Hasta 4 Redes Inalámbricas con 1 Dispositivo (múltiples SSID)
• Configuración de la Seguridad a Través de la Activación de un Botón y Control Paterno Dinámico



Revision General

El exclusivo chip 2T2R del router inalámbrico 802.11n ENHWI-2AN3 de Encore puede proporcionar una velocidad 3 veces más rápida que otros dispositivos 802.11g. El router ENHWI-2AN3 es apto para redes de hogares, oficinas hogareñas y pequeñas empresas, y proporciona un caudal de datos y rendimiento superiores, y un alcance inalámbrico sin precedentes. Con la nueva y simple función WPS™ o Configuración inalámbrica protegida, los usuarios pueden establecer fácilmente una conexión inalámbrica con sólo presionar un botón y continuar obteniendo una conexión inalámbrica segura.

El ENHWI-2AN3 incorpora un conmutador Fast Ethernet de 4 puertos full-dúplex de 10/100 Mbps que le permite conectar sus computadoras y dispositivos Ethernet cableados con el fin de crear una red. La función de router reúne todas estas funciones y permite que todas las PC y computadoras portátiles de la red puedan navegar por Internet y compartir la conexión a Internet de cable o DSL de alta velocidad utilizando sólo una dirección IP pública que el proveedor de servicios de Internet le proporcione. El router ENHWI-2AN3 también puede ser un repetidor inalámbrico al cambiar el modo a “Modo de repetidor”.

Caracteristicas

• Velocidad de Transferencia de hasta 300 Mbps

• Extensión de la Cobertura Inalámbrica Existente en el Modo de Repetidor

• Seguridad Inalámbrica Avanzada y Cortafuegos

• Creación de Hasta 4 Redes Inalámbricas con 1 Dispositivo (múltiples SSID) — Creación de redes por separado
para diferentes grupos de usuarios

• Configuración de la Seguridad a Través de la Activación de un Botón y Control Paterno Dinámico

• Incluye un asistente de configuración que lo ayuda a configurar su router a través de instrucciones en pantalla paso
a paso, simples y fáciles

• Compatibilidad con hasta 4 SSID que se pueden utilizar para separar el uso de la red inalámbrica compartida en
grupos como invitados, miembros de la familia, vecinos, etc., cada uno con sus propias políticas de conexión.
Instalación simple; no es necesario ser un experto para poner en funcionamiento a este router.

• Compatibilidad con el filtrado de direcciones URL (o filtrado de direcciones de sitios Web) y filtrado de palabras
clave. Se puede utilizar esta simple función para controlar el acceso a Internet para el control o la orientación
paterna, para el bloqueo de sitios Web o direcciones URL como sitios Web específicos que contengan imágenes
ofensivas, etc. Y para el bloqueo de palabras clave como el bloqueo de palabras ofensivas.

• Utilización de la tecnología MIMO (o múltiples entradas y salidas) más reciente para múltiples entradas/salidas
inalámbricas de caudales de datos más rápidas y más precisas

• Compatibilidad con el control del ancho de banda o la cola de prioridad, funciones utilizadas principalmente para
aplicaciones que requieren un gran ancho de banda, tales como WiFi Multimedia, transmisión de audio/video
y muchas más

• Compatible con las especificaciones del borrador 2.0 del estándar IEEE 802.11n, lo que permite un tasa de datos
físicos de hasta 300 Mbps en lo que respecta a la velocidad inalámbrica

• 4 puertos Fast Ethernet de 10/100 Mbps para red cableada con función Auto MDI-X

• 1 puerto WAN de 10/100 Mbps para DSL o cable módem con función Auto MDI-X

• Permite una tasa de transferencia de datos con repliegue automático para optimizar la confiabilidad, el caudal de
datos y el alcance de la transmisión

• Compatible con la encriptación de datos inalámbricos a través del estándar WEP de 64/128 bits para una mayor
seguridad

• Compatible con la seguridad mejorada para WPA-PSK, WPA2-PSK, WPA y WPA2

• Compatible con WPS™ (Configuración Wi-Fi protegida) PIN y PBC

• Administración y herramientas de configuración basadas en la Web a través del navegador WEB

• Compatible con el protocolo PPPoE/PPTP/L2TP para la conexión xDSL del ISP (Proveedor de servicios de Internet)

• Compatible con la función NAT para compartir una sola dirección IP pública para todos los usuarios de la red

• Compatible con servidor/cliente DHCP

• Compatible con la protección con cortafuegos, el mapeo de servidor virtual y la configuración de aplicación especial

• Compatible con UPnP

• Modo de router AP y modo de repetidor. El router ENHWI-2AN3 también puede funcionar como un repetidor
inalámbrico. Sólo cambie el modo de router AP a repetidor inalámbrico.

• Soporta Autenticación IEEE 802.1x, WDS (Sistema de Distribución Inalámbrica), y Punto a Punto y a Función
Multipunto

Especificaciones

Estándares:
IEEE 802.11b Wireless LAN
IEEE 802.11g Wireless LAN
IEEE 802.11n Draft 2.0 Wireless LAN
IEEE 802.3/IEEE 802.3u Fast Ethernet
ANSI/IEEE 802.3 Auto negotiation
Tecnología de modulación:
- OFDM: BPSK, QPSK, 16-QAM, 64-QAM
- BPSK, DQPSK, CCK
Tasa de transmisión de datos:
1, 2, 5.5, 6, 9, 11, 12, 15, 18, 22, 24, 30, 36, 48, 802.11g Best = 54
60, 90, 120, 157.5 Mbps (auto sense)
Sensibilidad del receptor:
IEEE802.11n - MCS0@ -91dBm, MCS7@ -74dBm
IEEE802.11g - 6Mbps@ -90dBm,54Mbps@ -70dBm
IEEE802.11b - 1Mbps@ -90dBm, 11Mbps@ -87dBm
Potencia de transmisión disponible:
IEEE802.11n - MCS7@ 15dBm
IEEE802.11g - 6~54 Mbps@ 15dMb
IEEE802.11b - 1, 11Mbps@ 16dBm
Rango de frecuencia de red inalámbrica:
2,400 ~ 2,484 GHz ISM band (channels 1 ~ 13)
Funciones inalámbricas:
Ahorro de energía (tecnología verde)
802.1x Authenticator
Hide SSID Beacons
WPS™ (Wi-Fi Protected Setup>
WDS (Wireless Distribution Scheme)
ACL Control
Best Channel Selection
Up to 4 SSID for GUESTS networking setup, supported with Policy Settings for LAN unauthorized access protection
Esquemas de modulación:
DBPSK/DQPSK/CCK/OFDM
(BPSK/QPSK/16-QAM/64-QAM)
Protocolo de acceso al medio:
CSMA/CA with ACK
Potencia de transmisión:
Two 2dBi dipole antennas with SMA connector
QoS:
WMM (WiFi Multimedia)
Application Base
- Priority Queue
- Bandwidth Monitor
Interfaz:
LAN: 4 x 10/100Mbps Auto-MDIX Ethernet ports
WAN: 1 x 10/100Mbps Auto-MDIX Ethernet port
Protocolos de red soportados:
TCP/IP
NAT
PPPoE/PPTP/L2TP
HTTP
DHCP Server/Client
Administración de red:
Web based configuration utility via Ethernet
Canal:
USA: Channel 1 ~ 11
Europe: Channel 1 ~ 13
Cortafuegos:
DoS (Blocks "Ping of Death", Port Scan, Sync Flood)
MAC and IP Filtering
ICMP Blocking
SPI (Stateful Packet Inspection)
DMZ (Demilitarized Zone)
Policy Based Parental Control
- Port Range
- Internet Domain Restriction
- Dynamic URL Filtering, Keyword Filtering
Seguridad:
64/128-bits WEP Encryption
WPA, WPA2
WPA-PSK, WPA2-PSK
MAC address filtering
Protocol filtering
Domain filtering
Rango de cobertura:
Indoor: Up to 100 meters (depends on environment)
Outdoor: Up to 300 meters (depends on environment)
Indicadores LED de diagnóstico:
Power,
WAN: Internet Connection
LAN: Wired Local Area Network connection
WLAN: Wireless Local Area Network Connection
Adaptador de alimentación:
Full Range 100-1240VAC. Output 12VDC /1.0
Temperatura de funcionamiento:
0 ~ 45°C
Temperatura de almacenamiento:
-10 ~ 70°C
Humedad:
15% ~ 95% RH, no condensation
Certificaciones:
FCC, CE, RoHS
Dimensiones (largo x ancho x alto):
138 x 97 x 25 mm

Modo Repetidor

How to use ENHWI-N3 / ENHWI-N34D / ENHWI-2AN3 / ENHWI-2AN34D / ENHWI-3GN3 as a Repeater?

 

  • For Advance Users, you can download this document.
  • The reason why people use a Encore wireless repeater is because some wireless remote client computers are out of range from the main network’s access point (wireless router), or the wireless client is in the dead spot or the device you want to share to the network have no wireless interface card.

    The function of a wireless repeater is basically to extend the wireless signal coverage. Wireless repeater does not authenticate, screen, secure, connect to the internet, give IP address to clients, broadcast names, etc., these are the wireless router’s job. Repeater only repeats what the main wireless router does to the wireless clients.

    Checklist:

    • You should know the wireless security type of the existing wireless AP/router, is it a WPA, WPA2 or a WEP?
    • The wireless security key, or password or passphrase of the existing wireless router
    • Your existing wireless router’s SSID
    • We recommend that the existing network you are about to add the Repeater on have a DHCP server running and able to lease IP address to all network clients. If you are not sure about this, please ask your ISP or the person who installed your network.

    Hardware Checklist:

    • Computer with wireless device turned off. This is only to set up the repeater, once finished the wireless can be turned on again.
    • The computer must have an available RJ-45 network interface card and web browser installed.
    • A working wireless router or Access Point with one available RJ45 port
    • RJ-45 UTP/TP Ethernet LAN Cable
    • The Encore Router is set to factory default. If your Encore Router is brand new and just pulled out of the box, no need to reset. If changes were made to any settings to the Encore Router before, make sure you “hardware reset” the Encore Router to the factory default settings. Check the User’s Manual on how to “hardware reset” the router.

    PROCEDURES:

    1.  Hooking up hardware connections:

    1. Both PC or Laptop and the Encore Router should be turned-on.
    2. Disable the wireless client from your PC or laptop computer (if not done so)
    3. Connect the Ethernet cable to the PC or laptop computer and the Encore Router. (This can be done while PC computer and router are turned on.)

    2.  Switching mode from AP Mode to Repeater Mode

    1. Using your computer’s web browser such as Internet Explorer or Safari Firefox, enter 192.168.0.1 to the address field then hit enter. You should see the Encore Router’s User Interface screen still in the AP Router Mode
    2. On the upper right corner of the user interface menu, click on the drop down menu and select “Repeater Mode”. Click the “OK” button to the warning box. Wait around 35 seconds until your screen comes back to Encore user interface screen, this time the screen is now in the Repeater Mode. If for some reason you were asked by the repeater to enter the username and password, enter the default username and password (admin/admin) and your Encore Router is now in Repeater Mode.

    NOTE:
    As of this moment your repeater is not connected to any router or network. It has to be configured further to be able to be connected to your current network and access point router.

    3.  Connecting your Repeater to your existing network access point or router:

    1. As soon as the Encore Router switched to the Repeater Mode, you should be able to see the same Utility Screen with fewer selections on the left pane.
    2. From the Main Menu screen click on “Wireless” located on the left pane.
    3. Click on “Site Survey” button, a new Window dialogue box will pop up showing a list of Access Points reachable by your Repeater
    4. Check your existing network’s access point SSID then click on the radio button that corresponds to your access point router then click “Connect” button.(If you can’t find your existing AP router, click on “Refresh” repeatedly until your access point show up, or your location is too far from your existing AP router).
    5. Click on the “Encryption” drop down menu, select your existing access point wireless security, enter your existing router’s wireless security key or passphrase then click “Apply”. If you get a FAILED message, repeat this procedure again, a wireless hiccup might be interfering, otherwise you now have a working Repeater.
    6. Check your repeater connection by going to your internet browser and open a web page of your choice. If successful your new wireless repeater is working.
    7. Disconnect the Ethernet cable and setup your computer back to its original wireless settings. At this stage, the Repeater is now invisible to any wireless client computers. When connecting a new wireless client within the repeater’s wireless range the process is the same as there is no Repeater device at all, the SSID of the wireless router will just be extended in range around where the Repeater is physically located.

    4.  Connect your remote wireless client to your wireless router

    1. Using your wireless client utility program, look for your existing router’s SSID and connects to it, if this is a new client you will be prompted with the wireless security key. Your repeater is invisible to all wireless clients. All it does is to repeat the wireless router signal as it is to extend its range. Once you have converted the Encore Router to Repeater and successfully connected to your existing router there will be no more configuration needed to the repeater. If you happen to see two identical SSID’s of your existing router, this means your wireless client is within the same range of your existing router and the new wireless repeater, then your client don’t need the repeater’s service.

    NOTE:
    If you are using Windows 7 and your existing access point security wireless is set to WPA2 (AES), make sure your Windows 7 wireless security type properties is set to WPA2-Personal. To check go to Windows 7 Wireless Network Connection, look for your REPEATER router, right-click on it then click Properties, check the settings in the “Security” tab.>

    NOTE:
    When checking the wireless site survey, you may see two routers with the same SSID (names), these are your Access Point and the REPEATER tied together. This also means you are within the reachable range of both Access point and REPEATER.

    5.  To check the Repeaters user interface

    At this moment, the Repeater is invisible to any client. The client’s IP address is drawn from the DHCP server most likely to be also your wireless router. Therefore the IP address of the repeater is also invisible to the clients. Follow steps below:

    1. Disable wireless connection or turn off wireless in the client PC computer
    2. Connect Ethernet network cable to the RJ-45 port of the client PC computer
    3. Connect the other end of the Ethernet cable to one of the LAN ports of the repeater.
    4. From your computer, set the network card IP address to Static IP Address entering 192.168.0.102, Subnet Mask 255.255.255.0, leave the rest as blank.
    5. Open IE or Internet explorer or any other web browser software and run 192.168.0.1, you should be able to see the Encore Repeater user interface screen. (Changing any settings in the repeater may affect its performance)

    Modo Access Point

    How to use my ENHWI-N3 or ENHWI-2AN3 as an Access Point?

    Please follow the step-by-step instructions below:

    1. Connect the Ethernet cable to the ENHWI-N3/ENHWI-2AN3 router and your main router with Internet connection and DHCP Server.

    2. Login to the ENHWI-N3/ENHWI-2AN3 web based Graphical User Interface.

    3. Make sure you are In the "AP Router Mode", click "System" on the left-hand side menu, and then click the "LAN".

    4. Set Static LAN IP in the same range as the main router.
    For example, your main router IP is 192.168.10.1, then set the Access Point IP to 192.168.10.2.

    5. Disable "DHCP", then click "Apply" button.

    6. Wait a few seconds until the changes have been saved.

    7. Click "Advanced" on the lefthand side menu, and then click the "NAT" tab. Disable "NAT", then click "Apply" button.

    Soporte

    Obten la mas reciente informacion de soporte aqui.