Encore Electronics, Inc.

	Country \|24/7 \|Register

PRODUCTS

ENRXWI-G
802.11g Wireless LAN Extender

Specification | Download

KEY FEATURES Features 3 Operation Modes: Extender (or Repeater), Access Point and Access Point Client Increases the coverage area of 802.11b/g wireless networks in Extender Mode without additional wiring Features strong wireless security: WEP, WPA, WPA-PSK, WPA2 and WPA-PSK2 Features web-based configuration tool Backward compatible with 802.11b/g	Purchase Online
Encore Wireless LAN Extender is a multifunctional wireless device. It functions in three modes: Extender, Access Point and Access Point Client. The Extender mode offers a simple and cost-effective way to expand the coverage area of your current 802.11b/g wireless network. Extender Mode Place the ENRXWI-G Wireless LAN Extender within the range of your current wireless network. Subsequently, ENRXWI-G can pick-up a signal from the wireless router (or access point) and transfer the signal further away than the original coverage area. You have thus effectively extended your wireless network without wiring or complicated configuration. Also, you can improve the reception at dead spots, areas characterized by poor signal quality, by placing ENRXWI-G between the dead spots and the wireless router. Access Point Mode Connect the ENRXWI-G Wireless LAN Extender to your wired Ethernet router (using a RJ-45 cable). Configure ENRXWI-G accordingly. Now, you have just upgraded your old wired router into an 802.11g wireless router. Access Point Client Mode Connect ENRXWI-G Wireless LAN Extender to the Ethernet port of you desktop or laptop computer (using a RJ-45 cable). Configure ENRXWI-G accordingly. Now, you can use it like a regular 802.11g wireless adapter enabling your computer to access wireless network. Use the ENRXWI-G Wireless LAN Extender in Extender Mode, to increase your wireless coverage over an extended area such as in a warehouse, multi-story house and public space. You can also use it in wireless hot spot or outdoors where you always need additional coverage for your wireless network. Encore Wireless LAN Extender operates both in 802.11b and 802.11g standards. For your protection and convenience, the ENRXWI-G Wireless LAN Extender comes with strong security features such as WPA-PSK, WPA2 and web-based configuration utility. Some manufacturers use the term Repeater. Both Extender and Repeater mean the same thing.
Back To Top

SPECIFICATIONS Standard: IEEE 802.11b/g (Wireless LAN) IEEE 802.3u (Fast Ethernet) Radio Technology: 802.11b: Direct Sequence Spread Spectrum (DSSS) 802.11g: Orthogonal Frequency Division Multiplexing (OFDM) Transmission Rate: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps (auto sense) Receiver Sensitivity: 54Mbps: Typical -68dBm @ 10% PER (Packet Error Rate) 11Mbps: Typical -78dBm @ 8% PER (Packet Error Rate) Wireless LAN Frequency Range: 2412 ~ 2484 MHz ISM band (channels 1 ~ 14) Modulation Schemes: DBPSK/DQPSK/CCK/OFDM Media Access Protocol: CSMA/CA with ACK Transmit Power: 802.11g: Typical 15dBm 802.11b: Typical 18dBm Antenna Type: One external 2dB dipole antenna Interface: 10/100BASE-TX RJ-45 Ethernet Channel: USA: 1 ~ 11 Europe: 1 ~ 13 Japan: 1 ~ 14 : Security: 64/128-bits WEP Encryption/Decryption WPA WPA2 WPA-PSK WPA2-PSK Range Coverage: Indoor: Up to 50 meters (depends on environment) Outdoor: Up to 100 meters (depends on environment) Diagnostic LEDs: Power; LAN: Link, ACT; WLAN: ACT Power Adapter: 7.5V / 1A Operation Temperature: 0 ~ 40°C Storage Temperature: -25 ~ 70 °C Humidity: 10% ~ 90% RH, no condensation Certifications: FCC Part 15.247 for US ETS 300 328 for Europe
Back To Top

MORE INFORMATION

Data Sheet ENRXWI-G Data Sheet Manual ENRXWI-G Manual Specifications and features are subject to change without prior notice. Each brand name or trademark is the property of its lawful owner.
Back to Top