Encore Electronics, Inc.

	Country \|24/7 \|Register

PRODUCTS

ENDSL-A2+R
One Port Ethernet ADSL2+ Router

Specification | Download

KEY FEATURES Support ADSL2+ technology to achieve a speed up to 24 Mbps for downloads (3X faster than ADSL) and up to 1Mbps for uploads Provide one Fast Ethernet (10/100 Mbps) ports for wired networking Features one USB port to provide Internet connectivity to computer without an Ethernet port Provide backward compatibility with ADSL and ADSL2 Supports network security, including NAT firewall and password protection Enjoy bandwidth-consuming applications such as online gaming, video-on-demand and multi-media rich web browsing with less delay Supported by Windows®, Mac® and Linux® operation systems (refer to the specification table for exact software versions) Provide user-friendly configuration tool and web-based user
Encore ADSL 2+ Router is a comprehensive 3-in-1 gateway designed for small offices and home users. It consists of a fully featured ADSL2+ modem combined with one Fast Ethernet wired networking (10/100Mbps) port and a NAT firewall. ADSL2+ is the latest ADSL broadband connectivity standard with a download speed up to 24 Mbps* (3X faster than ADSL and 450X faster than 56.6 Kbps modem). ENDSL-A2+R allows you to enjoy media-rich Internet browsing, faster downloads, video-on-demand, and on-line gaming or distance learning with less delay. With its user-friendly configuration tools, installation and operation of ENDSL-A2+R is a breeze. You can monitor this product remotely through Telnet session. The security features such as password protection and embedded firewall ensure that outsiders can't access your private network. Use the versatile ENDSL-A2+R to conduct day-to-day business or home computing with your complete satisfaction. Maximum performance is achieved when your ISP (Internet Service Provider) supports ADSL 2+ standard. If not, ENDSL-A2+R will automatically adopt the ADSL standard.
Back To Top

SPECIFICATIONS ADSL Compliant: ANSI T1.413 issue 2 ITU-T G.992.1 (G.dmt) ITU-T G.992.2 (G.lite) G.994.1 (G.hs, Multimode) ITU-T G.992.3 (ADSL2 G.dmt.bis) ITU-T G.992.4 (ADSL2 G.lite.bis) ITU-T G.992.5 (ADSL2+, Annex A, B, L, M) Reach Extended ADSL (RE ADSL) ATM and PPP Protocols: ATM Forum UNI 3.1/4.0 PVC Support up to 8PVCs Traffic Shaping UBR, CBR, VBR, GFR Multi Protocol over AAL5 (RFC1483 / 2684) Classical IP over ATM (RFC1577) RFC2516 (PPP over Ethernet) RFC2364 (PPP over ATM) VC and LLC multiplexing OAM F4 and F5 segment end-to-end loopback VPI is 0-255 and VCI is 1-65535 Bridging / Routing: Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D) Supports up to 128 MAC learning addresses IP routing-RIPv2 (backward compatible with RIPv1) Static IP routing Routing: IP / UDP / TCP / ARP / RARP ICMP (Internet Control Message Protocol) IGMP (Internet Group Management Protocol) IP Management: NAT (Network Address Translation): up to 1024 NAT translation sessions NAPT (Network Address and Port Translation) DHCP Server / Relay / Client DNS Proxy Dynamic DNS UPnP support Security: PPP over PAP (Password Authentication Protocol; RFC1334) PPP over CHAP (Challenge Authentication Protocol; RFC1994) Password Protected System Management Embedded Firewall and IP filtering HTTP Web-based management: Web-based GUI Configuration / Management CLI (Command Line Interface) via serial interface or Telnet over Ethernet Telnet Remote Management Firmware upgrade via FTP / TFTP SNMP Support Built-in Diagnostic tool Dimension: 125mm(length) x 88mm (width) x 27mm (height) Net weight: Approximately 200g Interface: One USB port compliant with USB v1.1, full speed (12Mbps) One RJ45 ports compliant with IEEE 802.3/802.3u, 10/100Mbps auto selection One RJ11 port for ADSL connection One reset button for restoration of factory default setting LED Indicators: ADSL, DATA, LAN, USB, PWR Supported OS: Windows® 98SE, ME, 2000, XP, MAC® OS, Linux® Power Requirement: Power Adapter: Input 110±10 or 230±10 VAC, Output 9VAC 1000mA Environmental: Operating temperature: 0°C ~ 70°C ambient Humidity: 5 % ~ 95 % (non-condensing) Storage temperature: -20°C ~ 70°C Certification: FCC part 15, CE, LVD
Back To Top

MORE INFORMATION

Data Sheet ENDSL-A2+R Data Sheet Quick FAQ Q. How to setup Public IP address A. The following is the example that shows you how to use the router as bridge. Then you can assign your PC with public IP that connect to internet through the router . 1. Use the router quick setup >> fill the VPI & VCI & encapsulation, especially the bridge mode have to enabled .) 2. After you configure already, go to admin page >> commit & reboot >> click "commit". 3. Setup you PC with FIX public IP . Note: The router work as bridge mode had some limitation, the encapsulation only support RFC1483bridge LLC or RFC1483bridge VC. If your internet connection is PPPoE with FIX IP, you can use third party dial-up tools such as RASPPPoE ...etc, every PC with FIX IP through PPPoE connection you can dial-up in your PC manually For the other encapsulation such as PPPoA or RFC1483route or RFC1577, sorry , the router don't support this in bridge mode Specifications and features are subject to change without prior notice. Each brand name or trademark is the property of its lawful owner.
Back to Top