Encore Wireless Antenna Booster enhances the out going signal and reception sensitivity of 2.4GHz wireless products, such as 802.11b/g/n devices. It is an omni-directional antenna that you use to complement WLAN (wireless local area network) for increased coverage. Use ENAT-SO4 to replace the antenna* that comes with wireless adapters, routers or access points. Instantly, you will improve the wireless connectivity at areas previously characterized by poor single quality, such as behind a wall or beyond the maximum distance specified by the manufacturer.

Install ENAT-SO4 with a snap! It doesn't require additional wiring or configuration. At the same time, ENAT-SO4 reduces the need to purchase additional access points or repeaters. Encore Wireless Antenna Booster is a perfect add-on device to extend your wireless coverage to large areas!

* ENAT-SO4 connects to an SMA connector, which is common on 802.11b/g/n wireless products. You need an
appropriate converter if your 2.4GHz wireless product uses a different type of connector.

•  Boost transmission power by 3x

•  1.5m extension cable included

•  Work with Encore wireless series

•  Amplify the wireless signal in all directions with 4dBi gain

•  Increase the coverage area of 2.4GHZ wireless products, such as 802.11b/g/n compliant routers and adapters

•  Improve wireless receptions at areas characterized by poor signal quality

•  No drivers to install and no network setting to modify

•  Simply replace the antenna comes with the wireless device

Frequency: 2.4 ~ 2.4835 GHz
Impedance: 50 Ohms nominal
SWR: <= 2.0
Gain: 4 dBi
Radiation: Omni
Connector: Reverse SMA
Height: 167mm
Cable Length: 1.5m